Adjust The Sauna Session Time; Configure Pre-Selection Mode - Villeroy & Boch Comfort Control Bedienungsanleitung

6. Individual settings
6.4.

Adjust the sauna session time

'
See the requirements and programming table on page 32 for details of operation.
1. Use the left/right buttons
. The adjustable setting will flash.
2. Use the up/down keys
. The standard session time is four hours.
3. Press the button
.
The parameter setting will stop flashing.
. If the value is at variance to a standard program, it is automatically saved to the individual settings
of the active sauna program.
. The session time remaining is displayed together with the hourglass symbol
6.5.

Configure pre-selection mode

' See the requirements and programming table on page 32 for details of operation.
FIRE HAZARD!
Always check the control system before starting up, and ensure that no flammable
objects are left on the sauna stove.
1. Use the left/right buttons
2. Adjust the pre-selection with the up/down buttons
3. Press the button
4. The program starts automatically in accordance with the warmup period. The cabin is ready for use
at the programmed time.
. Select "End" to exit pre-selection mode.
Note that the control system will start before the programmed time.
PAGE 38
to select the menu
to alter the flashing adjustment setting.
to confirm the setting.
to select the menu
to confirm the time setting.
.
.
.
Comfort Control
.
50701117/10.05