Care And Maintenance; General Points - Villeroy & Boch Comfort Control Bedienungsanleitung

Comfort Control
8.

Care and maintenance

General points

Real wood/real-wood veneers
Wood is a natural product. Fluctuations in colour, structure, graining and/or knots and small
imperfections are not quality errors, but proof of the natural origin of the material, and cannot be
regarded as a reason for complaint.
Sauna / infrared cabin surfaces
None of the sauna / infrared cabin surfaces must be immersed in water or exposed to damp for long
periods. They should be wiped down with a dry cloth for this reason. Damage caused by water
infiltration cannot be regarded as grounds for complaint.
Chemicals such as hair colourings, deferring agents, nail-varnish remover, perfume etc. should be
removed from the sauna/infrared cabin surfaces should be removed immediately.
Damage
Damage to painted, powder-coated, veneered or laminated components of the sauna / infrared cabins
should be repaired as quickly as possible to prevent further damage to these surfaces.
Colour sample of sauna / infrared cabin surfaces
Samples are non-binding and only intended to give a general idea of the appearance of the
sauna/infrared cabin surfaces.
Cleaning and care
DO NOT use abrasive, acid-based or solvent cleaners, or products containing grease.
Always wipe with a DRY cloth.
Clean fixtures with a soft, moist cloth.
Use lukewarm water and a mild household detergent (e.g. diluted washing-up liquid).
Always switch off all electrically-operated items before cleaning with a dry cloth.
CAUTION! Correct ventilation is a prerequisite for maintaining the quality and appearance of the unit.
We reserve the right to make amendments.
50701117/10.05
PAGE 41