Activate Sauna; Infrared Activation - Villeroy & Boch Comfort Control Bedienungsanleitung

5. Operation
Requirement/instruction for subsequent operation:
d
The control system is in standby mode. The time is displayed.
. The selected program is activated automatically three seconds after the last button is pushed.
. *) The cabin temperatures indicated for infrared/Infraclima operation relate to an ambient
temperature of 20 °C to 25 °C.
Programs - temperature:
Sauna Infrared *)
1 Individual 1
program
2 80 °C 2
3 85 °C 3
4 90 °C 4
5.4.

Activate sauna

FIRE HAZARD!
Always check the control system before starting up, and ensure that no flammable
objects are left on the sauna stove.
Drain the water tank of the vaporizer before using the sauna.
' See section 5.10. - Shut down the vaporizer.
1. Press the MODE button.
. The display shows the last operating mode to be selected, along with its adjustment settings.
2. Press the MODE button again if necessary to display the SAUNA text.
. When the warmup phase is complete, the "bather" symbol
ready for use.
'
If you wish to change the settings of the selected program, see section 6.
5.5.

Infrared activation

1. Press the MODE button.
. The display shows the last operating mode to be selected, along with its adjustment settings.
2. Press the MODE button again if necessary to display the IR text.
. When the warmup phase is complete, the "bather" symbol
ready for use.
' If you wish to change the settings of the selected program, see section 6.
PAGE 32
Programs - temperature/air humidity:
Comfort Climate
Individual 1 Individual
program program
34 °C 2 50 °C
37 °C 3 55 °C
40 °C 4 57 °C
5 60 °C
Infraclima *) Air humidity
1 Individual Individual program
program
2 34 °C
3 36 °C
4 38 °C
5 40 °C
is displayed. The cabin is now
is displayed. The cabin is now
Comfort Control
50701117/10.05