Detailed Description Of Preset Functions - Denon DN-C630 Bedienungsanleitung

ENGLISH

(3) Detailed Description of Preset Functions

(* = initial setting)
1) "Preset Type (*)" (Three different sets (types) of presettings can be made and used for different purposes.)
* Preset Type 1
Preset Type 2
Preset Type 3
2) "Finish (*****)"
Finish Stop
* Finish Next
Finish Recue
3) "Power On (****)"
* Power On Stby
Power On Play
Power On Stop
4) "CueDet. (–**) dB"
CueDet. (–*) dB
CueDet. OFF
5) "Sleep ON (OFF)"
* Sleep ON
Sleep OFF
6) "Program 1 OFF (ON)"
Program 1 OFF (ON)
7) "Progam 2 OFF (ON)"
Program 2 OFF (ON)
8) "Program 3 OFF (ON)"
Program 3 OFF (ON)
9) "Subcode ON (OFF)"
Subcode ON
* Subcode OFF
NOTE: 0 sec. start is not possible when the above is set to "Subcode ON".
10) "End Mon. (**) s"
End Mon. (**) s
End Mon. OFF
11) "E.O.M. (**) s" (Output EOM tally signal to remote pin (24))
E.O.M. (**) s
E.O.M. OFF
12) "Next Stb. Off (ON)"
* Next Stb. OFF
Next Stb. ON
13) "Reserve. OFF (ON)"
* Reserve. OFF
Reserve. ON
22
: Set to preset type 1.
: Set to preset type 2.
: Set to preset type 3.
: Stop mode is set after playback ends.
: Standby mode is set at next track after playback ends.
: Standby mode is set at playback start position after playback ends.
: Standby mode is set at specified track after TOC is read.
: Playback begins in the all repeat mode after TOC is read.
: Stop mode is set after TOC is read.
: Set the audio detection level for cueing. (–72/–66/*–60/–54/–48/–42/–36)
: Sound startup position is not cued.
: Automatically turn the servo functions off if no button is operated for 30 minutes in the pause, standby
or manual search mode.
: Do not automatically turn the servo functions off.
: Store the contents of program 1 when on. (Initial setting - OFF)
: Store the contents of program 2 when on. (Initial setting - OFF)
: Store the contents of program 3 when on. (Initial setting - OFF)
: Output subcodes with the digital output signals. (consumer SPDIF format)
: Do not output subcodes with the digital output signals. (consumer IEC 958 Type I format)
: Set the end monitor time. (5/*10/15/20/25/30/35)
: Do not use the end monitor function.
: Set the EOM time. (0/5/*10/15/20/30/60)
: Do not use the EOM function.
: Return to the play start position and standby when the CUE button is pressed during playback.
: Standby at the beginning of the next track when the CUE button is pressed during playback.
: Specified track (index) is searched for immediately when select knob is turned during playback.
: Track (index) to be searched for is scheduled after playback of current track (index) ends when select
knob is turned during playback.
Press the PLAY MODE button to cancel the reserved track.