Specifications - WimTec PROOF S6 Montage- Und Bedienungsanleitung

PROOF S6

Specifications

Operating voltage:
Power consumption:
Magnetic valve:
Active range:
Close-Active range:
Stagnation rinse:
Flushing stop:
Cleaning stopp:
Flow rate:
Static pressure:
Water temperature:
Flow rate:
Water inlet:
Water outlet:
Front plate:
Thermost handle:
All dimensions in mm
Electr. install-
ation pipe
for 12 V=
WW
R 1/2" IG
via power supply 230 V 50 Hz / 12 V=
Art.No. 117 899 - power supply for one control unit
Art.No. 113 792 - power supply for up to 5 control units
max. 3.5 W
cartridge 6 V
from 15 cm - 50 cm (50 cm factory setting)
1 - 5 cm
activatable, after 3 h - 48 h of none-use for 10 s
from 10 s - 10 min (in manual program from 10 s - 60 s)
for 10 min
0,05 - 0,6 MPa (0,5 - 6 bar)
max. 0,8 MPa (8 bar)
max. 70 °C (max. 80 °C for max. 10 min)
max. 22 l/min at 0,3 MPa (3 bar)
R 1/2" IT
R 1/2" IT
Stainless steel / chromed brass
Chromed brass
:
185
R 1/2" IG outlet to
showerhead
140
152
masonry
tile
plaster
11
min 95
max 120
CW
R 1/2" IG
Shower control
23
26
WimTec PROOF S6
EN
19