Technical Specifications; Installation Dimensions - WimTec SanTec OCEAN U8 Montage- Und Bedienungsanleitung

Technical specifications

Operating voltage:
Power consumption:
Magnetic valve:
Active range:
Pre-flushing:
Main flushing:
Dry-out protection:
Flow rate:
Static pressure:
Flow rate:
Water inlet:
Water outlet:
Noise class:
Dimensions:
Front plate:
Flush-mount set:

Installation dimensions

All dimensions in cm
51,5
A
B
A = finished floor level
OCEAN U8
230 V / 50 Hz
approx. 3 VA
cartridge 6 V
Set to 50 cm by default (configurable from 30 - 70 cm)
1 s, if urinal is not used for more than 5 min
set to 5 s by default (configurable from 1 - 15 s)
automatic flushing when not in use for 24 h
0,08 - 0,5 MPa (0,8 - 5 bar)
max. 0,8 MPa (8 bar)
0.3 - 0.7 l/s at 0.3 MPa (3 bar) acc. to EN 12541, reducible
R 1/2" IG
R 1/2" OT
I
W/H/D: 120 x 152 x 14 mm
W/H/D: 128 x 122 x 85 mm
10-19
Zulauf
DN 15
Ablauf
DN 50
B = structural floor level
min 100
Height sensor middle
100 (in element
approx. 100-120)
approx. 50 active area
Urinal control SanTec OCEAN U8
EN
11