Specifications - WimTec SMART HYPlus Montage- Und Bedienungsanleitung

EN
SMART

Specifications

WimTec SMART - HyPlus 9 V:
Battery:
Battery life:
WimTec SMART - HyPlus 230 V:
Operating voltage:
Power consumption:
HyPlus specifications:
Flushing stop:
Intelligent
stagnation flush:
Stream regulator:
Further technical specifications:
Magnetic valve:
Active range:
Close active range:
Continuous flow:
Cleaning stopp:
Flow rate:
Static pressure:
Water temperature:
Flow rate:
Water connection:
Connection hoses:
Noise class:
18 Washbasin fitting
HyPlus
9 V Alkali 6LR22 or 6LF22 (in scope of supply) optional 6 V Lithium CR-P2
9 V Alkali – approx. 100.000 flushings (max. 2 years)
6 V Lithium – approx. 200.000 flushings (max. 4 years)
230 V 50 Hz
max. 0,2 W
1 min or 10 min, adjustable
activatable / deactivatable,
flushing interval: after 0,5 h to 24 h,
minimum flushing duration: 10 s to 180 s in set flushing interval,
max. flushing capacity at none-usage:
laminar (without aeration)
cartridge 6 V
automatic
approx. 3 cm
activatable / deactivatable, for the flushing stop time
activatable / deactivatable, for 3 min
0,05 - 0,6 MPa (0,5 - 6 bar)
max. 0,8 MPa (8 bar)
max. 70 °C (max. 80 °C for max. 10 min)
6 l/min (independent of pressure)
G 3/8" IT
approved by DVGW W 270 and DVGW W 543
I
WimTec SMART
HyPlus
864 l/day