WimTec PROOF S6 Montage- Und Bedienungsanleitung Seite 25

PROOF S6
Assembly
13
16
13.Configure the desired functions at the electronics module
and insert the electronics module into the flush-mounted set.
14. Control position of the thermostat handle - shutter button
points vertical upwards.
15. Insert the front plate at an angle and apply some pressure
while turning it to the left to align it horizontally.
16. Arrest front plate by fastening the locking screw at the
lower right.
17. Open the main water valve and turn on the power supply.
18. Perform a system test.
14
17
Shower control
15
18
ATTENTION!
Perform the following steps
in the order indicated!
WimTec PROOF S6
EN
!
25