WimTec PROOF S6 Montage- Und Bedienungsanleitung Seite 24

EN
PROOF S6
Assembly
7
10
7. Mount adapter for thermostat using the 2.5 Allen key.
8. Feed the connection cable into the flush-mount set and connect it to the pow-
er supply (art. no. 117 899 and art. no. 113 792).
Attention: The power supply must not be installed in the flush-mount set!
9. Attach the mounting frame using the 4 screws. Make sure that the cable con-
nections remain intact and the cables are not crimped.
10. Correctly align the mounting frame and securely fasten the screws. When
tightening the screws, ensure that the mounting frame does not get warped.
Apply the included special grease to the front of the valve.
11. Connect the magnetic valve to the electronics module.
12. Connect the power cables to the electronics module (mind correct +/- polarity).
Plug the power cable and switch on the power supply (the safety lock mecha-
nism of the magnetic valve will activate).
24 Shower control
8
11
WimTec PROOF S6
9
12