WimTec PROOF S6 Montage- Und Bedienungsanleitung Seite 23

PROOF S6
Assembly
1
4
1. Remove the flush-mount protective cover.
2.
Cut off protruding parts from the flush-mount box so it
aligns with the tiles.
3. Where necessary, seal off space between wall and flush-
mount set with silicone.
4. Close the main water valve.
5. Open both integrated stop valves using a screwdriver.
6.
Control marks on mixing shaft and thermostat cartridge and
align them if necessary.
2
5
Shower control
3
6
ATTENTION!
Perform the following steps
in the order indicated!
WimTec PROOF S6
EN
!
23