WimTec PROOF S6 Montage- Und Bedienungsanleitung Seite 31

PROOF S6
Description of the functions
Cleaning stop:
Serves to disable the fitting prior to cleaning.
User detection
By stepping laterally to the
shower and approaching the
infrared sensor with your hand
(1 - 5 cm distance) the water
flow will be activated.
Enable cleaning stop
After a dwell period of 5 s in
1 - 5 cm distance infront of the
infrared sensor the water flow
stops and the cleaning stop
will be activated for 10 min.
During this period the red
LED inside the infrared sensor
flashes.
1-5 cm
Shower control
Disable cleaning stop
The function automatically
stops if no user was detected
for 10 minutes.
You can manually disable the
function following the same
procedure used to enable it.
The fitting will resume normal
operation with a safety delay
of 3 s after you leave the
sensor range.
10 min
WimTec PROOF S6
EN
31