Specifications - WimTec ONE WT Montage- Und Bedienungsanleitung

ONE WT

Specifications

Operating voltage:
Power consumption:
Active range:
Flushing stop:
Stagnation rinse:
Follow-up time:
Flow rate:
Static pressure:
Flow rate:
Water inlet:
Water connection outlet:
Noise class:
Wall box:
Sensor cap:
Flush-mount set:
Dimensions in mm:
WimTec ONE WT:
ONE WT Sensor:
56
32
230 V / 50 Hz
approx. 3 VA
approx. 30 cm (20 - 70 cm adjustable)
set to 1 min by default
(configurable from 10 s - 10 min)
for 10 s to 20 s (configurable) when not in use for 3–48 h
(configurable, set to 48 h by default)
1 - 25 s adjustable
0,05 - 0,6 MPa (0,5 - 6 bar)
max. 0,8 MPa (8 bar)
6 l/min (independent of pressure)
R 1/2" IG
R 1/2" OT
I
Ø = 46 mm, depth = 56 mm
Ø = 60 mm
W/H/D: 135 x 165 x 77 mm
38
60
56
Flush-mount set
masonry level
Flush-mount
set:
pile
masonry
WimTec ONE WT
Washbasin fitting
EN
Outlet
R ½" OT
135
Inlet
R ½" IT
13