Introduction; Intended Use; Features; Package Contents - Parkside PEXS 270 A1 Originalbetriebsanleitung

RANDOM ORBITAL SANDER
PEXS 270 A1

Introduction

Congratulations on the purchase of your
new appliance. You have selected a high-
quality product. The operating instructions
are part of this product. They contain important infor-
GB
mation on safety, usage and disposal. Before using
the product, familiarise yourself with all operating
and safety instructions. Use the product only as de-
scribed and for the specified areas of application.
Please also pass on these operating instructions to
any future owner.

Intended use

This appliance is intended for the dry sanding of
wood, metal and paintwork. Any other uses of or
modification to the appliance is deemed to be im-
proper and carries the risk of serious personal inju-
ry. The manufacturer accepts no responsibility for
damage attributable to misuse. This appliance is
not intended for commercial use.

Features

ON/OFF switch
Lock button
Dust catcher
Pad
Sanding disc
Exhaust vent
Adapter for external vacuum extraction
Reducer
18

Package contents

1 random orbital sander PEXS 270 A1
1 dust catcher
1 sanding disc
1 adapter for external vacuum extraction
1 reducer
1 operating instructions

Technical data

Rated voltage: 230 V ~ 50 Hz
Nominal power: 270 W
Idle oscillation speed: n
Idle speed: n
Grinding disc: ø 125 mm
Protection class: II /
Noise and vibration data:
Noise measurement value determined in ac-
cordance with EN 60745. The A-rated noise level
of the power tool is typically as follows:
Sound pressure level L
PA
Sound power level L : 91 dB(A)
WA
Uncertainty K:
Wear hearing protection!
Vibration values (vector total of three directions)
determined in accordance with EN 60745:
Vibration emission value a
Uncertainty K = 1.5 m/s
NOTE
► The vibration level specified in these inst-
ructions has been measured in accordance
with the standardised measuring procedure
specified in EN 60745 and can be used to
make equipment comparisons. The specified
vibration emission value can also be used to
make an initial exposure estimate.
= 24000 rpm
0
= 12000 rpm
0
: 80 dB(a)
3 dB(a)
2
= 6.8 m/s
h
2
PEXS 270 A1