Delay Function; General Operating Notes; Start / Pause / Cancel; Energy Saving Function - KKT KOLBE CC9001IND Benutzerhandbuch

Programming

Delay function

Only when the clock has been set, the delay function can
be used. In stand-by mode:
• Press 2 times, the display shows
• Press and to set the end hour time of delay.
• Press button again.
• Press and to set the end minute time of delay.
• Press to choose the cooking function you require.
• After set the cooking time and temperature, press
start.
Note:
After setting delay function
clock, and „End". Press
after 3 seconds it returns to the current working
state.
Start / Pause / Cancel-Standby
• You can start working mode by pressing
• Pausing is possible by pressing the
• By pressing the -key two times, you can cancel the wor-
king mode and turn the oven to stand-by-mode.

Energy saving function

• During in waiting state and reminding state , press
three seconds, the display will turn itself off and set to
energy-saving mode.
• If there's no operation in 10 minutes in waiting state, the
display will shut down and go into energy-saving mode.
• In energy-saving mode, press any key or rotate any enco-
der can quit the energy-saving mode.

General operating notes

• The oven light is turned on in all heating modes.
• When you have selected a heating function, but the button
and "End".
be displayed or turn back to waiting state. The selected
function will be recognized as invalid.
• To make sure that your input was detected right from the
SensorTouch-Control panel, a buzzer will sound.
• When a program has finished, a buzzer will sound five
times to remind you when cooking has finished.
to
the screen shows the
to inquire the end time,
.
button.
for
is not pressed within 5 minutes, the current time will
73