Flexible Area - KKT KOLBE CC9001IND Benutzerhandbuch

Flexible area

6.5 Flexible Area
• This area can be used as a single zone or as two different zones,
accordingly to the cooking needs anytime.
• Flexible area is made of two independent inductors that can be
controlled separately. When working as a single zone, a cookware
is moved from one zone to the other one within the flexible area
keeping the same power level of the zone where the cookware
originally was placed, and the part that is not covered by cookware
is automatically switched off.
• Important: Make sure to place the cookwares centered on the sing-
le cooking zone. In case of big pot,oval,rectangular and elongated
pans make sure to place the pans centered on the cooking zone
covering both cross.
Examples for good and bad pot placements:
As big zone
1.To activate the flexible area as a single big zone, simply press the
dedicated keys.
2. The power setting works as any other normal area.
3. If the pot is moved from the front to the rear part (or vice
versa),the flexible area detects automatically the new position,
keeping the same power.
4. To add a further pot, press the dedicated keys again, in order to
detect the cookware.
As two independent zones
To use the flexible area as two different zones with different power
settings, press the dedicated keys.
55