Replacing The Fuse - Powerfix PDM 250 A1 Bedienungsanleitung

POWERFIX PDM 250 A1

Replacing the fuse

To replace the fuse, proceed as follows:
Switch off the multimeter and remove all test leads before opening the multimeter!
 Remove the holster [2].
 Remove the two screws on the back of the multimeter and remove the back panel.
 Replace the fuse with another of the same type.
 Replace the back panel and screw it tight with the two screws.
 Re-insert the multimeter in the holster [2].
16 - English