Operation - Sage Precision Brewer SDC450 Kurzanleitung

Operation

WATER HARDNESS SETTING
When first turned on, the machine will show
'HARD' on LCD, asking you water hardness level.
Press SELECT dial once. Dip the water hardness
test strip into the filled water tank for 1 second,
remove and wait for 1 minute to reveal the result.
Rotate SELECT dial and press the dial to select
the level accordingly.
FLUSHING FOR FIRST TIME USE
1. Ensure that the empty coffee basket and empty
carafe (with assembled lid) are inserted into
the machine.
2. Fill the water tank with fresh cold water to the
MAX mark on the water tank. Plug into power
outlet and press the START / CANCEL button
to turn the machine on. Rotate the SELECT
dial to FAST. Press the START / CANCEL
button.
3. After flushing, empty the basket and carafe.
NOTE
We recommend to flush once more in
Fast mode.
8
BREWING A CARAFE
1. Select the correct basket & filter for the amount
of coffee you're making.
OR
2 ‑ 8
CUPS
CAUTION
Filling the basket without a mesh basket filter
or filter paper may cause the basket to overflow
during the brewing cycle.
2. The LCD will display the basket setting –
"Basket" or "Cone". To change the basket type,
rotate the SELECT dial to Settings and press
the dial. Rotate the SELECT dial to the basket
type, press the SELECT dial to set.
3. Fill the water tank with fresh cold water up to
the MAX marking on the water tank.
OR
8+
CUPS