Countdown Function; Alarm Function - Conrad 67 17 28 Bedienungsanleitung

11. Countdown function

• While in normal time display, press key „C" three times, to access the countdown function. The dis-
play shows „TMR".
• Press and hold key „A" for 2 seconds, until „Hours" starts to flash in the display.
• Set the desired number of hours, using key „B" or „D".
• Press key „C". The display „Minutes" starts to flash.
• Set the desired number of minutes, using key „B" or „D".
• To confirm the settings, press key „A".
• Press key „B", to start the countdown.
As soon as the countdown has elapsed, a beep will be emitted. The beep can be
deactivated by pressing key „C".

12. Alarm Function

• While in normal time mode, press key „C" four times, to select the alarm setting mode. The display
shows „AL".
This radio controlled watch has the option to set two alarm times. Alarm 1
(Display = AL1) and alarm 2 (Display = AL2).
42