Spare Parts; Technical Data - FLORABEST FHE 550 A1 Betriebsanleitung

overload or incorrect use is excluded
from the guarantee. Certain compo-
nents are subject to normal wear and
tear and are excluded from the guaran-
tee.
• Furthermore, the prerequisite for guar-
antee services is that the references
indicated in the operating instructions
regarding cleaning and maintenance
have been adhered to.
• Damage, which has been caused
from material or manufacturing faults,
will be made good free of charge, by
replacement delivery or repair.
• Repairs, which are not covered by
the guarantee, can be carried out for
charge by our service center. Our
service center will be glad to provide
you with a cost estimate.
We can only process devices which
have been packaged sufficiently and
which have been dispatched with cor-
rect stamping.
Devices sent in freight collect - by
bulk freight, express or with other
special freight - are not accepted.
• Defective units returned to us will be
disposed of for free.

Spare parts

The following spares are available from
Grizzly Service-Center. Please indicate the
machine type and the number of the spare
part with your order.
Saw chain .................................3009 1400
Chain bar ..................................3010 0100
Bio chain oil 1 liter ....................3023 0001
Bio chain oil 5 liter ....................3023 0002
If further spare parts should be neces-
sary, please find the part number on the
exploded drawings.

Technical Data

High pruning saw
Rated input voltage..............230V~, 50 Hz
Input power . .................................... 550 W
Safety class ......................................... II
Chain speed ................................ 10,8 m/s
Weight (without guide rail + chain) . ... 4,1 kg
Weight (with guide rail + chain) ....... 4,6 kg
Oiltank ............................................70 cm
Chain ............................Oregon 91 P040X
Chain pitch..............................................3/8"
Chain bar ....10" Oregon OE 100SDEA041
Number of chain drive links......................40
Chain width . ...................................1,3 mm
Teeth of the sprocket chain wheel ...........6
Sawing length (max.) . ...................260 mm
Acoustic pressure level
(L ) ............................ 88 dB(A);K
pA
Sound power level
guaranteed ..........................104,0 dB(A)
measured (L ) . .... 102,2 dB(A); K
wA
Vibration (a ) at the handle . ..3,0 m/s
n
Noise and vibration values were deter-
mined according to the standards and
stipulations mentioned in the declaration
of conformity.
Technical and optical changes can be car-
ried out in the course of further develop-
ment without notice. All dimensions, refer-
ences and information of this instruction
manual are therefore without guarantee.
Legal claims, which are made on the ba-
sis of the instruction manual, cannot thus
be considered as valid.
GB
................ FHE 550 A1
pA
wA
; K=2,5
2
IE
3
=1,5
=1,5
15