Accessories; After-Sales Service And Application Service - Bosch 0 607 450 626 Originalbetriebsanleitung

OBJ_BUCH-281-005.book Page 21 Tuesday, June 10, 2014 2:41 PM
– Full the oil chamber 20 with engine oil.
– Retighten the locking screw 9.
0 607 450 62. (see figure E)
The striking mechanism of the impact wrench must be
lightly lubricated after 60 working hours at the latest.
– To do so, turn the pneumatic tool so that the handle points
upward.
– Unscrew the locking screw 9 with a suitable Allen key.
– Fill engine oil into the striking mechanism through the
opening of the locking screw.
– Retighten the locking screw 9.
After approximately 100,000 screwing operations, the strik-
ing mechanism must be relubricated.
– To do so, turn the pneumatic tool so that the handle points
upward.
– Unscrew the locking screw 9 with a suitable Allen key.
– Drain the waste oil in an environmental-friendly manner.
– Fill engine oil into the striking mechanism through the
opening of the locking screw. The quantity of engine oil to
be refilled can be found in the chart row on engine oil (see
"Technical Data").
– Remove any excess oil using a soft cloth.
– Retighten the locking screw 9.
Lubrication of Pneumatic Tools that do not belong to the
CLEAN Product Line
For all Bosch pneumatic tools that do not belong to the CLEAN
product line (these have a special type of compressed-air mo-
tor that functions with oil-free compressed air), oil mist
should be added continuously to the flowing-through com-
pressed air. The compressed-air oiler required for this is in-
cluded in the compressed-air service unit on the line side of
the pneumatic tool (for more details, please refer to the com-
pressor manufacturer).

Accessories

For more information on the complete quality accessories
program, please refer to the Internet under
www.bosch-pt.com or contact your specialist shop.

After-sales Service and Application Service

In all correspondence and spare parts orders, please always
include the 10-digit article number given on the type plate of
the pneumatic tool.
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. Exploded views and information on spare parts can al-
so be found under: www.bosch-pt.com
Bosch's application service team will gladly answer questions
concerning our products and their accessories.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Bosch Power Tools
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0844) 7360109
E-Mail: boschservicecentre@bosch.com
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ:
Phone: +61 3 95415555
www.bosch.com.au
Republic of South Africa
Customer service
Hotline: (011) 6519600
Gauteng – BSC Service Centre
35 Roper Street, New Centre
Johannesburg
Tel.: (011) 4939375
Fax: (011) 4930126
E-Mail: bsctools@icon.co.za
KZN – BSC Service Centre
Unit E, Almar Centre
143 Crompton Street
Pinetown
Tel.: (031) 7012120
Fax: (031) 7012446
E-Mail: bsc.dur@za.bosch.com
Western Cape – BSC Service Centre
Democracy Way, Prosperity Park
Milnerton
Tel.: (021) 5512577
Fax: (021) 5513223
E-Mail: bsc@zsd.co.za
Bosch Headquarters
Midrand, Gauteng
Tel.: (011) 6519600
Fax: (011) 6519880
E-Mail: rbsa-hq.pts@za.bosch.com
English | 21
3 609 929 C65 | (10.6.14)