Technical Data; Ambient Conditions - Dräger X-am 5000 Gebrauchsanweisung

Technical data

Extract: see the Technical Manual for details

Ambient conditions:

During operation and –20 to +50 °C for NiMH power packs type:
storage HBT 0000 and HBT 0100,
with alkali single cells type:
Duracell Procell MN 1500
–20 to +40 °C for NiMH single cells type:
GP 180AAHC
Panasonic LR6 Powerline
0 to +40 °C for alkali single cells type:
Varta 4006
700 to 1300 hPa
10 to 90% (to 95% briefly) rH.
Position of use any
Storage time
X-am 5000 1 year
Sensors 1 year
Ingress protection IP 67 for instrument with sensors
Alarm volume Typically 90 dB (A) at 30 cm distance
Operating time
– Alkali battery Typically 12 hours under normal conditions
– NiMH
power pack:
T4(HBT 0000) Typically 12 hours under normal conditions
T4 HC(HBT 0100) Typically 13 hours under normal conditions
Dimensions approx. 130 x 48 x 44 mm (H x W x D)
Weight approx. 220 to 250 g
Refresh interval for 1 s
display and signals:
CE marking: Electromagnetic compatibility
(Directive 2004/108/EC)
Explosion protection (Directive 94/9/EC)
24
1)
2)
2
and for alkali single cells type:
2) 2)
, Varta 4106 ,
3)
Approvals : (see "Notes on Approval" on page 262)
The BVS 10 ATEX E 080 X technical suitability test
is based on the adjustment with the target gas.
1) The Technical Manual and Instructions for Use/data sheets for the sensors used and the
PC software CC-Vision for Dräger X-am 5000 can be downloaded on the product page for the
X-am 5000 at the following website: www.draeger.com See also the enclosed Instructions for
Use and data sheets for the sensors used.
2) Not subject to the Metrological Performance Test BVS10 ATEX E 080X and PFG 10 G 001X.
3) The technical approvals are valid for the X-am 5000 gas detection instrument and the calibration
cradle. The explosion-protection approvals are only valid for the X-am 5000 gas detection
instrument; the calibration cradle must not be used in the Ex zone.