Herunterladen Inhalt Inhalt Diese Seite drucken

Troubleshooting - Reely Rock Crawler Bedienungsanleitung

1:8 ep 4wd rtr
Vorschau ausblenden Andere Handbücher für Rock Crawler:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen



16. Troubleshooting

Even though the model and the remote control system were built to the latest available technology, there can still be
malfunctions or faults. This is why we would like to show you how to remove some possible faults.
Problem
The model doesn't respond
Vehicle doesn't stop when you let go
of the operating lever for the drive
function
The vehicle does not drive in a
straight line
Steering or driving movements
opposite to movement of steering dial
and throttle lever
Vehicle becomes slower or the
steering servo only shows slight
reactions.
Unpredictable vehicle reactions; drive
or servos start without reason,
steering does not function properly.
46
Remedy
• Check the vehicle's rechargeable battery pack
• Check the rechargeable batteries/batteries in the transmitter
• Check the rechargeable battery pack connection.
• Check the on/off switch of the vehicle and the transmitter.
• Check marking on crystals (same frequency or transmitter/
receiver crystal correctly inserted?).
• Carry out the crystal replacement on another channel.
• Adjust the neutral position for the drive function via the trimmer
on the transmitter.
• Adjust the steering function correctly with the trimmer on the
transmitter.
• Check the steering linkage.
• Check the clearance in the steering/wheel suspension and, if
necessary, replace the defect/worn out parts.
• Check servo reverse function on the transmitter, if necessary,
modify the setting.
• Check the vehicle's rechargeable battery pack
• Completely extend the transmitter antenna.
• Unwrap the transmitter's antenna and install it properly (in the
vertically mounted antenna tube).
• Check the rechargeable batteries/batteries in the transmitter
• Check the vehicle's rechargeable battery pack
• Check marking on crystals (same frequency or transmitter/
receiver crystal correctly inserted?).
• Carry out the crystal replacement on another channel.
• Distance between vehicle and transmitter is too small or too large.

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis