Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4. Measurement Considerations
Holding the meter by its handle, point the IR sensor toward the
object whose temperature is to be measured.
The meter automatically compensates for temperature deviations
from ambient temperature. Keep in mind that it will take up to 30
minutes to adjust to wide ambient temperature changes. When low
temperatures are to be measured followed by high temperature
measurements some time (several minutes) is required after the
low (and before the high) temperature measurements are made.
This is a result of the cooling process which must take place for the
IR sensor.
5. Non-Contact IR Measurement Operation
5.1. Power ON/OFF
1. Press the IRT key to take a reading. Read the measured
temperature on the LCD.
2. The meter powers OFF automatically approximately 15
seconds after the IRT key is released.
-22-
Werbung
Inhaltsverzeichnis
