Selecting The Power Level; Setting The Cooking Time; Quick Start Function - Silvercrest SMWC 700 A1 Bedienungsanleitung

Selecting the power level

♦ Press the microwave button
display
♦ Use the dial
You can select between 0 and 700 W in 50-W steps.
♦ Press the dial

Setting the cooking time

After you have selected the power level, set the desired cooking time:
♦ The display
You can set a time from 10 seconds to 95 minutes.
The increments for setting the cooking time are as follows:
–
from 0 sec to 5 min: in 10-second increments
–
from 5 to 10 min: in 30-second increments
–
from 10 to 30 min: in 1-minute increments
–
from 30 to 95 min: in 5-minute increments
Starting the cooking process
Once you have set the power level and the cooking time, you can start cooking:
♦ To start cooking, press the dial
down.
♦ Once the set time has elapsed, "End" appears on the display
will hear four beeps. Press the stop button
appliance so that it switches back into standby mode.
If you do nothing, there will be a further four beeps every two minutes.

Quick start function 1

♦ In standby mode, turn the dial
required cooking time.
♦ Start cooking at 700 W by pressing the dial
SMWC 700 A1
.
to set the required power output.
to confirm the set power level.
shows : . Set the desired time with the dial
. "700" (700 watts) appears on the
. Cooking begins and the time counts
or open the door of the
to the right (towards
.
GB │ MT
.
and you
) and set the
│ 75 ■