First use
Setting up the appliance
WARNING – RISK OF FIRE!
►
This microwave oven is not suitable for installation in a kitchen cabinet.
Sufficient ventilation for the appliance cannot be assured in enclosed
cabinets. The appliance could be damaged and there is an additional
risk of a fire!
CAUTION – PROPERTY DAMAGE!
►
Do not install the microwave above a cooker or any other appliance
generating heat. Installation in such a location could cause damage to the
appliance and thus invalidation of the warranty.
►
♦
Remove all packaging materials and any protective film from the appliance.
♦
Set up the appliance. Select an level surface offering sufficient space for the
adequate ventilation of the appliance:
Ensure that you maintain a minimum clearance distance of 10 cm from neigh-
bouring walls/surfaces. Make sure that the door of the microwave oven can
be opened easily.
Keep a gap of at least 20 cm free above the microwave.
♦
Clean the appliance as described in the section "Cleaning".
♦
Place the turntable
Ensure that it is lying correctly on the catch and does not wobble.
♦
Insert the plug into the mains power socket. There will be a beep and the
display
■
72
│
GB │ MT
Do not remove the light grey mica cover plate, which is mounted
inside the cooking chamber to protect the magnetron.
centrally on the catch in the cooking chamber.
shows :
.
SMWC 700 A1