Selecting The Power Level; Setting The Cooking Time; Quick Start Function - Silvercrest SMWC 700 A1 Bedienungsanleitung

Selecting the power level

♦ Press the microwave button 6
display 5 .
♦ Use the dial 9 to set the required power output .
You can select between 0 and 700 W in 50-W steps .
♦ Press the dial 9 to confirm the set power level .

Setting the cooking time

After you have selected the power level, set the desired cooking time:
♦ The display 5 shows 00:00 . Set the desired time with the dial 9 .
You can set a time from 10 seconds to 95 minutes .
The increments for setting the cooking time are as follows:
–
from 0 sec to 5 min: in 10-second increments
–
from 5 to 10 min: in 30-second increments
–
from 10 to 30 min: in 1-minute increments
–
from 30 to 95 min: in 5-minute increments
Starting the cooking process
Once you have set the power level and the cooking time, you can start cooking:
♦ To start cooking, press the dial 9 . Cooking begins and the time counts
down .
♦ Once the set time has elapsed, "End" appears on the display 5 and you
will hear four beeps . Press the stop button q
appliance so that it switches back into standby mode .
If you do nothing, there will be a further four beeps every two minutes .

Quick start function 1

♦ In standby mode, turn the dial 9 to the right (towards
required cooking time .
♦ Start cooking at 700 W by pressing the dial 9 .
SMWC 700 A1
. "700" (700 watts) appears on the
or open the door of the
) and set the
GB │ IE │ 45 ■