Herunterladen Inhalt Inhalt Diese Seite drucken

Description Of The Appliance; Commissioning; Installation Of The Appliance; Preparing The Appliance - Silvercrest SMW 800 A2 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für SMW 800 A2:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 93

Description of the appliance

1 Display
2 Door opener button
3 Glass plate
4 Star rotator
5 Cold air intake
6 Grill Button
7 Preset Button
8 Defrosting button
9 Time Button
0 Stop button
q Control dial/Start/Quickstart
w Kitchen timer button
e Combination Button
r Operation button
t Grill stand

Commissioning

Installation of the appliance

Risk of fire!
This microwave oven is not suitable for installation in
a kitchen cabinet. In closed cabinets sufficient ventilation
for the appliance cannot be assured. The appliance
could be damaged and there would be the additional
risk of a fire!
Select an even surface offering sufficient space
for the adequate ventilation of the appliance:
Ensure that you maintain a minimum distance
of 10 cm from neighbouring walls/surfaces.
Ensure that the door of the microwave oven
can be opened easily.
Maintain a gap of at least 20 cm above the
microwave oven.
Ensure that the electrical plug is accessible
without problem, so that in case of danger it
can be easily reached and removed.
Do not remove the pads underneath the micro-
wave oven.
Do not block the ventilation slots 5. If you do,
it could damage the appliance.
Install the appliance as far away as possible
from radios and televisions. The operation of
the microwave oven can cause malfunctions to
radio and televsision reception.
Warning:
Do not install the microwave above a cooker or any
other appliance generating heat. Installation in such
a location could cause damage to the appliance and
lead to a subsequent cancellation of the warranty
provisions.

Preparing the appliance

Remove all packaging materials and any
protective film on the surface of the housing.
D D O NOT remove the light grey flim-
mer cover plate, which is mounted
in the cooking area to protect the
magnetron.
Insert the plug into a power socket.
Use a 230 - 240 V ~ , 50 Hz, mains power
socket with a 16A fuse. It is recommended that
the microwave oven is powered from its own
ring main. If you are unsure about how to con-
nect the microwave oven, consult a specialist.
- 7 -

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis