First Use; Setting Up The Appliance - Silvercrest SMWC 700 A1 Bedienungsanleitung

First use

Setting up the appliance

WARNING – RISK OF FIRE!
► This microwave oven is not suitable for installation in a kitchen cabinet .
Sufficient ventilation for the appliance cannot be assured in enclosed
cabinets . The appliance could be damaged and there is an additional
risk of a fire!
CAUTION – PROPERTY DAMAGE!
► Do not install the microwave above a cooker or any other appliance
generating heat . Installation in such a location could cause damage to the
appliance and thus invalidation of the warranty .
►
♦ Remove all packaging materials and any protective film from the appliance .
♦ Set up the appliance . Select an level surface offering sufficient space for the
adequate ventilation of the appliance:
Ensure that you maintain a minimum clearance distance of 10 cm from neigh-
bouring walls/surfaces . Make sure that the door of the microwave oven can
be opened easily .
Keep a gap of at least 20 cm free above the microwave .
♦ Clean the appliance as described in the section "Cleaning" .
♦ Place the turntable 2 centrally on the catch in the cooking chamber .
Ensure that it is lying correctly on the catch and does not wobble .
♦ Insert the plug into the mains power socket . There will be a beep and the
display 5 shows 1:00 .
■ 42 │ GB │ IE
Do not remove the light grey mica cover plate, which is mounted
inside the cooking chamber to protect the magnetron .
SMWC 700 A1