Operation Without Computer; Operating Functions; B) Setup Menu; Switching On/Off - Conrad 19 12 44 Bedienungsanleitung

12. Operation without computer

a) Operating functions

First disconnect the USB connection and unplug the USB cable from the
microscope camera.

Switching on/off

With the button "
button depressed for approx. 2 seconds.
Selecting the zoom factor
With the jog wheel (1) you can select one of the two zoom factors (approx. 7x and approx.
27x), see imprint on the top of the microscope camera.
With these two factors, a display of the respective zoom factor appears on the top right of
the display (can be switched off in the settings menu).
If you turn the jog wheel (1) all the way to the right, you can also use the microscope camera
as a normal digital camera to take "normal" pictures.
Focus the image by carefully turning the jog wheel (1).
Digital zoom
With the four-edge operation button "
4x). Move the button to the left or the right.
For fast adjustment, keep the four-edge operation button in the left or right position.
Setting the brightness of the white LEDs
With the button "
in several stages.
Selecting the display mode
You can change the display mode by briefly pressing the button "
display appears on top.
"N" = Normal mode
"G" = Greyscale
"I" = Inverse display
"E" = Contour display
"D" = Dual image display (normal image on the right, maximum digital enlargement on the
left)
" (4) you can turn the microscope camera on or off. To do so, keep the
" (9) you can adjust the brightness of the white LEDs around the lens
" (3) you can set the digital zoom (max.
" (5). A corresponding
33