Settings Menu - Conrad 19 12 44 Bedienungsanleitung

b) Settings menu
If you press the button "
Select one of the functions with the buttons "
(8) for confirmation. You change and confirm the setting options with the same button.
Quit the menu or the setting option with the button "
The following functions are available:
"POWER SAVING" (power saving mode)
You can select a time (1, 2, 5, 10 minutes) after which the microscope camera activates its
power saving mode and turns off the display (the white LEDs flash once every 3 seconds in
power saving mode. By pressing any button, you quit power saving mode and reactivate the
display).
When selecting "NEVER", power saving mode is turned off and the display remains
permanently lit even if you do not press a button.
"STATUS DISPLAY"
With the setting "ON" the display shows function icons on the top (e.g. zoom factor,
brightness setting, etc).
If set to "OFF", the display only shows the battery charge status on top.
"BRIGHTNESS" (background illumination)
Here you can set the background illumination for the display in several stages.
"WHITE BALANCE" (automatic white balance)
When set to "ON", the automatic white balance is turned on, if set to "OFF" it is deactivated.
"DELETE ALL PIC" (delete all images in the memory)
With this function you can delete all images in the memory.
To delete all images, select "YES" and then press the button "
images are not deleted.
"FACTORY DEFAULT" (resetting the factory settings)
If set to "YES", the settings are reset to the factory defaults, if you select "NO", the settings
are not changed.
" (7), the display shows the settings menu.
" (5) or " " (9) and press the button "
" (10).
" (8). If set to "NO", the
"
35