Conrad 19 12 44 Bedienungsanleitung Seite 34


In mode "D", you can press the button "
button "
of the display in case of a frozen image.
Please note that you cannot save any images in mode "D".
Press the respective button again and the key icon disappears.
Save image
Press the button "
prompt appears on the display.
With the buttons "
"DISCARD" (cancel).
If you then press the button "
the image is saved after previous selection or the live image reappears.
Switching the reticule/ruler
If you keep the button "
reticule display to that of a ruler.
The width is displayed on the right next to the ruler.

The right calculation only takes place with the two zoom settings 7x and 27x or
if the digital zoom is activated with these two zoom factors.
So focus the image in one of the two zoom settings 7x or 27x. If you now change
the digital zoom with the four-edge operation button "
measured width to the right of the ruler changes as well.
Viewing images in the memory
To view the images in the memory, press the button "
" " you can select the desired image.
Zoom the displayed image with the four-edge operation button "
If you press the button "
saved image, the right part the live image. This way, you can compare an image in the
memory with another one. If you press the button "
released again. Quit the display of the two image halves by pressing the button "
briefly (you may have to release a "frozen" image with the button "
By pressing the button "
34
" to "freeze" the image. A key icon appears on the top right
" (8) or the four-edge operation button "
" (10) and " " (7), you can select between "SAVE" (save image) and
" (8) or the four-edge operation button "
" depressed for approx. 3 seconds, the device switches from the
" (8), the image is split into two halves. The left part shows the
" (10) again, you return to record mode.
" (8) or the four-edge operation
" (10). With the buttons "
" (8) again, the image is frozen or
" (8) again beforehand!).
" (3). A safety
" (3),
" (3), the
" or
" (3).
" (10)