Conrad 19 12 44 Bedienungsanleitung Seite 31

After clicking on "Connect", the software establishes the connection to the microscope
camera. Once this is done, all functions are available (see illustration above).
"Disconnect" = disconnecting the USB connection
"Download" = Download all images
"Upload" = Uploads images to the memory in the microscope camera
"Save" = Saves the currently selected image on a computer drive
"Save All" = Saves all images on a computer drive
"Delete" = Deletes the currently selected image from the memory in the microscope camera
"Delete All" = Deletes all images from the memory in the microscope camera
Via the camera icon on the top right, you can switch the software to live mode (see next page)

If you want to disconnect the microscope camera from the computer, click on
the button "Disconnect". Then you can remove the USB cable from the
microscope camera.
31