Connections And Control Elements; Technical Data; Putting Into Operation And Use; Care And Cleaning - VOLTCRAFT CT-6 Bedienungsanleitung

Connections and Control Elements

1 Power cable
2 Power LED
3 USB current outputs
4 Rack for up to 6 mobile phones, smartphones or tablets

Putting into operation and use

Please note:
The USB charging station is only intended for charging appropriate equipment (e.g.,
mobile phones, smartphones, tablets, etc.). It cannot be used as a USB hub and
does not transfer any data.
• Place the USB charging station on a level, flat, stable surface. Protect valuable furniture
surfaces by using a suitable mat to prevent scratches, pressure points or discolourations.
• Connect the power adapter to a proper mains socket on the public supply network. The
power LED (2) lights up.
The USB charging station is now ready for operation; the charging outputs can be used for
the connection of appropriate devices.
Depending of the device, use an appropriate connecting cable between the USB
charging station and the device to be charged.
• The available current is divided between the USB current outputs (3), so it does not matter
which output of the device should be the first one to be connected with.
• After a mobile phone, smartphone or tablet is fully charged, disconnect it from the USB
charging station.
• If charging of all connected devices is over, disconnect the USB charging station from mains
supply by removing the mains plug out of the mains socket.
Keep the product in a cool, dry, dust-free place out of the reach of children.

Care and Cleaning

• Disconnect the product from the mains supply before each cleaning procedure.
• Never use abrasive cleaning agents, cleaning alcohol or other chemical solutions, since
these could damage the housing or even impair operation.
• Use a dry, lint-free cloth to clean the product.
Disposal
Electronic devices are recyclable material and do not belong in the household
waste. Dispose of the unserviceable product in accordance with the relevant statu-
tory regulations.

Technical Data

Operating voltage ......................... 110 - 240 V/AC, 50/60 Hz
Output ........................................... 5 V/DC, max. 10.2 A
Protection class ............................ II
Charging outputs .......................... 6 (USB socket type A), max. 2.4 A per output
(in total max. 10.2 A)
Overcurrent protection .................. yes
Surge protection ........................... yes
Excess temperature protection ..... yes
Short-circuit protection .................. yes
Ambient conditions ....................... Temperature -10 °C to +50 °C, air humidity 0% to 95%
relative, non-condensing
Dimensions (L x W x H) ................ 260 x 110 x 79 mm
Weight .......................................... 730 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in
electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
This publication represent the technical status at the time of printing.
Copyright 2016 by Conrad Electronic SE. *1455811_V1_0616_02_VTP_m_en