Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operating instructions
USB charging station „CT-6"
Item no. 1455811
Intended Use
The USB charging station has 6 USB power outputs intended for charging suitable devices
(e.g., smartphones, tablets, etc.). Power is supplied via a built-in power adapter (operating
voltage 110 - 240 V/AC, 50/60 Hz); connect the USB charging station to a regular mains socket.
For safety and approval reasons, you may not convert and/or alter the product. If you use the
product for purposes other than those described above, the product may be damaged. Moreo-
ver, the improper use involves risks such as short-circuits, fire, electric shocks, etc. Please read
the operating instructions carefully and do not discard them. If you pass the product on to a third
party, please hand over these operating instructions as well.
This product complies with the applicable national and European regulations. All names of
companies and products are the trademarks of the respective owners. All rights reserved
Package Contents
• USB charging station
CT-6
„
"
• 5 x Micro USB cable
• 2 x Lightning cable
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions via the link www.conrad.com/downloads or scan the
QR code. Follow the instructions on the website.
Explanation of Symbols
The lightning symbol inside a triangle is used when there is a potential risk of per-
sonal injury, such as electric shock.
An exclamation mark in a triangle indicates important instructions in this operating
manual which absolutely have to be observed.
The arrow symbol is used when specific tips and information on handling are pro-
vided.
The product is designed according to protection Class II (reinforced or double insu-
lation, protective insulation).
Observe the operating instructions!
Safety Instructions
Please read the operating instructions carefully and pay particular attention to
the safety instructions. We do not assume liability for injuries/material damag-
es resulting from failure to observe the safety instructions and the information
in these operating instructions regarding the proper handling of the product.
Furthermore, in such cases, the warranty/guarantee will be null and void.
Dear Customer, the following safety instruction is intended not only for the protection
of your health, but also for the protection of the product.
Therefore, please read the following points very carefully before connecting and
using the product for the first time.
a) General information
• Unauthorised conversion and/or modification of the product is not allowed for
safety and approval reasons. Never dismantle the product.
• Maintenance, settings work or repairs may only be carried out by a specialist/
specialised workshop.
• Do not carelessly leave the packaging material lying around, since it could be-
come a dangerous plaything for children.
• Also observe the safety and operating instructions of all other devices that are
connected to the USB charging station.
• If in doubt about how to connect the device correctly, or should any questions
arise that are not answered in these operating instructions, please contact us or
another specialist.
b) Mains voltage/cable
• The construction of the product corresponds to the protection-class II (double or
reinforced isolation). Pay attention that the insulation (of the casing or the output
cable) is neither damaged nor destroyed.
• The product is designed to be operated with a mains socket with supply voltage of
110 - 240 V/AC, 50/60 Hz. Never operate it on a different voltage.
• The mains socket to which the product is connected must be easily accessible.
• Do not pull the power plug from the mains socket by pulling on the cable.
• Protect the product/mains cable from damage.
• If the product/mains cable is damaged, do not touch it; there is a danger to life
from electric shock!
First, switch off the mains voltage to the socket to which the product is connected
(switch off at the corresponding circuit breaker or remove the safety fuse or switch
off at the corresponding RCD protective switch, so that the socket is fully discon-
nected).
Disconnect the mains plug from the mains socket, do not use the product any
longer. Get the product checked by an expert or dispose of it in an environmentally
friendly way.
c) Installation site
• The complete product is intended for use in dry, indoor locations only. No part of
the product should become damp or wet; never handle it if your hands are wet!
Never place the product close to a bathtub, shower, etc.! There is a risk of a life-
threatening electric shock!
• Select a stable, flat, clean, sufficiently large place, for the USB charging station.
• Do not place the USB charging station on a flammable surface (e.g., carpet, table-
cloth). Always use a suitable, non-flammable, heatproof base.
• Do not place the USB charging station on surface of valuable furniture without
suitable protection. The impact of heat could lead to colour or material changes.
Scratches or pressure points may occur on the furniture surface.
• Keep the device away from easily flammable materials (e.g., drapes, paper), liq-
uids (e.g., gasoline) or gases. There is a risk of fire and explosion!
• Avoid direct sunlight, strong heat or cold. Keep the product away from dust and
dirt.
• Do not use in the immediate vicinity of strong magnetic or electromagnetic fields,
transmitter aerials or HF generators. This can impact the electric control system.
• Make sure that the cable is not pinched or damaged by sharp edges.
d) Operation
• The product is not a toy. Devices operated on mains voltage should not be used by
children. Therefore, be especially careful when children are around.
Use the product where it is out of the reach of children.
• Install all cables in such a way that nobody may trip over them.
• Handle the product with care; it can be damaged by impacts, blows or falls even
from a low height.
• Avoid the following unfavourable ambient conditions at the installation point or
during transportation or storage:
- Damp or excess air humidity
- Cold or heat, direct sunlight
- Dust or flammable gases, fumes or solvents
- Strong vibrations, impacts or blows
- Strong magnetic fields such as those found close to machinery or loudspeakers
• Never use the product immediately after it has been brought from a cold room into
a warm one. The resulting condensation may lead to malfunctions or damage un-
der certain circumstances! The power adapter/power cable/mains plug also poses
an associated risk of electric shock!
Wait until the product has reached room temperature before connecting the power
adapter to the mains and using the product. This may take several hours!
• Only use the device in a moderate climate, do not use it in a tropical climate.
For more information on acceptable environmental conditions, see the chapter
"Technical Data".
• The enclosure of the USB charger heats up during operation (depending on output
current). Make sure there is sufficient ventilation; never cover the USB charging
station during operation.
• For safety reasons, it is recommended not to leave mobile phones, smartphones
and tablets unattended when charging.
• In schools, educational centres, hobby and self-help workshops, the operation of
the product must be supervised by trained employees.
• Disconnect the product from the mains voltage when you no longer need it (e.g.,
when it is put in storage). Disconnect the mains plug from the mains socket.
• Disconnect the product from the mains voltage during thunderstorms in order to
protect the product as well as the connected devices from any damages.
• Do not apply force when connecting the USB plugs. A USB plug fits only in one
direction into the USB socket.
Werbung
Inhaltsverzeichnis
