Connecting The Tape Inputs; Connecting The Outputs - MC Crypt MCB-1003 Bedienungsanleitung

Connection

Connecting the TAPE inputs

(28) TAPE IN RCA input
To the stereo RCA input, you can connect a playback device with a LINE level such as a cassette deck, a CD player,
etc. The red RCA socket is the right input, the white RCA socket is the left input.
(29) TAPE IN jack input
To the stereo jack input, you can connect a playback device with a LINE level such as a cassette deck, a CD player,
etc. The socket marked „R" is the right input, the socket marked „L" is the left input.
The TAPE IN RCA input and the TAPE IN jack input are connected to the same fader channel. If both
inputs are connected and a signal is supplied on both inputs, the mixed signal of the two inputs is in fader
channel 9/10.

Connecting the outputs

(27) TAPE OUT output
Recording devices such as cassette decks, tape recorders or CD recorders can be connected to these RCA sockets
and the mixer signal can be recorded. The red RCA socket is the right output, the white RCA socket is the left output.
(39) MON SEND output (monitor output)
You can connect your monitor audio amplifier or your active monitor box to this asymmetric mono jack socket output.
This output supplies the sum of the individual monitor channel signals (depending on the settings of the respective
MON controls).
(40) PHONES headphones output
You can connect your headphones to this stereo jack socket output. The output supplies the left and the right
MASTER output signal. The headphones should have an impedance of at least 100 ohms, as otherwise there might
be mismatches.
(41) FX SEND output
You can connect an external effect unit to this asymmetric mono jack socket output. This output supplies the sum
of the individual FX channel signals (depending on the settings of the respective FX controls).
(42) MAIN OUTPUT (L, R)
These two jack sockets supply the output signal of the mixer. Connect your power amplifier here. Connect the input
of your amplifier to this output socket. The jack socket labelled „R" is the right output and the jack socket labelled „L"
is the left output.
49