Inhaltsverzeichnis; Attention! Read Without Fail; Intended Use; Technical Data - Conrad SN 2289 Bedienungsanleitung

GB
IR Alarm Unit SN 2289
List of contents
Attention! Read without fail! ....................................................... 2
Intended use .................................................................................. 3
Technical Data ................................................................................ 3
Safety information ........................................................................ 4
Product description ....................................................................... 5
Important installation instructions ............................................... 8
IR Sensor installation ..................................................................... 9
1. Fixing the sensor .................................................................... 9
2. Cable connection ................................................................. 10
Putting into operation ................................................................ 11
Alarm unit installation ................................................................ 12
Alarm adjustment ........................................................................ 12
Sensor adjustment ....................................................................... 13
Manual operation ........................................................................ 14
Maintenance ................................................................................ 15
Fault-finding ................................................................................ 15

Attention! Read without fail!

In case of damage caused by failure to observe the instructions,
guarantee rights become forfeited. We accept no responsibility
for resultant consequential damage. These operating instruc-
tions are to be read through carefully before installation and
putting into service! Especially observe all warnings!
2

Intended use

The IR Alarm Unit is intended for use in the surveillance of doors,
house entrances, etc., e.g. as an alarm installation, greeting light
Page
or automatic door bell.
This product is approved only for connection to a 230V 50 Hz ear-
thed AC power socket!
It is possible to install the IR Alarm Unit sensor both out of doors
and indoors. When used out of doors, however, care should be
taken to avoid direct contact with water (rain/fog). Installation
should therefore be made under the eaves or similar!
The alarm unit itself, on the other hand, is suitable only for ope-
ration indoors! Contact with dampness, e. g. in the bathroom or
other damp areas, must be avoided!
Any other use than as described above can lead to damage to
this product; in addition, this is accompanied by dangers such as
for example short circuit, fire, electric shock etc. No part of the
product may be modified or converted nor the case opened!
The safety instructions are to be followed without fail!

Technical Data

Power supply ..................................:230 Volt 50 Hz 10%
Contact rating.................................:2000 Watt max. resistive load
Sensor protection type ..................:IP 44
Sensor protection class ..................:I
1000 Watt max. inductive
load cos. ϕ
3