Recall Stations From Preset Memories; Aux In Socket - PERFECTPRO myBox Bedienungsanleitung

Preset stations
Storing the stations in preset memories, please follow below steps.
There are 5 memory presets in this radio.
1. Press the Power button to turn on the radio.
2. Rotate Tuning Control knob to tune to required station.
3. Press and hold down the required preset until radio beeps.
The preset number will appear in the display and the station will
be stored under chosen preset button.
4. Repeat this procedure for the remaining presets.
5. Stations stored in preset memories can be overwritten by
following above procedures.

Recall stations from preset memories

1. Press the Power button to turn on the radio.
2. Momentarily press the required Preset button, the preset
number and station frequency will appear in the display.

Aux In socket

The Aux In socket is to connect audio source like the MP3 player or
CD walkman to listen the audio program via the speaker.
Remove the rubber cover, connect the audio source with a
3.5 mm audio connector wire, rotate the Volume Control to
play the audio program.
Note:
When the audio source is connected, it will automatically mute the
radio program you are listening. Display will still show the station
frequency before you connect the audio source.
7