Correct Interpretation Of Status Leds; Replaying Recorded Videos Or Photos - Conrad 75 17 39 Bedienungsanleitung

13. Correct Interpretation of Status LEDs

"RECHARGE" status LED (7) lights red:
The internal battery is being charged. The "RECHARGE" status LED goes out when
the built-in battery is fully charged.
The "VIDEO/FOTO" status LED (8) lights blue:
The camera is in video mode. It is currently not recording
The "VIDEO/FOTO" status LED (8) lights green:
The camera is in photo mode. It is currently not recording
The "VIDEO/FOTO" status LED (8) flashes blue:
A video is being recorded.
The "VIDEO/FOTO" status LED (8) flashes green:
An image is being recorded.
The "VIDEO/FOTO" status LED (8) lights green + blue:
Motion detection mode is active. Depending on whether the camera is in photo or
video mode, a recording starts when motion is detected.The "VIDEO/FOTO" sta-
tus LED (8) flashes green + blue:
A motion was detected A video is being recorded.
The "VIDEO/FOTO" status LED (8) lights blue and flashes green:
A motion was detected. An image is being recorded.

14. Replaying Recorded Videos or Photos

Hold down the "Multi function button" (6) for 5 seconds to switch on the camera.
To replay the videos and photos recorded before, the camera must be connected to
a free USB port of your laptop or PC.
36