Conrad 75 17 39 Bedienungsanleitung Seite 33

• Switch on the camera by pressing the "multi function button" (6) for approx. 2
seconds. For an explanation of the display on the screen with a connected AV
cable, see "Explanation" in this chapter (see below).
• Tighten the fastening screws of the "mounting base" (3) again after adjustment.
• Disconnect the AV cable again.
• To achieve best remote control results, the delivery includes a connection cable
with an infrared receiver. Connect this cable to the "AV OUT/IR Extension"
socket (12) and place the infrared receiver so that there is a direct line of sight
between the remote control and the infrared receiver.
Explanation:
If the camera is switched on and a display device is connected to the "AV OUT/IR
Extension" (12) socket,
the following screen display appears:
33