Werbung
No.
Page
Item
16
D-12
D.4.4.2
Configuring the
EFI
driver
(3.11a4
version/3.11x1
version)
17
D-15
D.4.4.2
Configuring the
EFI
driver
(3.11a4
version/3.11x1
version)
Incorrect
D.4.4.2 Configuring the EFI driver (3.11a4 version/3.11x1 version)
Correct
D.4.4.2 Configuring the EFI driver (3.11a4 version/3.11x1 version
10 Press the [Esc] key once to return to the window displayed in step 6.
11 Specify the boot device.
Incorrect
Select [3. Configure Boot Parameters] from the menu displayed in step 6.
The following menu is displayed:
Correct
10 Press the [Esc] key once to return to the window displayed in step 6.
11 Set the topology.
Make the following EFI-Bios settings according to the connection type (Fabric
connection or FCAL connection).
*The following screenshot of the EFI-Bios Utility screen corresponds to a configuration
with two Single FC cards and two Dual FC cards.
< Fabric >
Select the card whose setting you want to change.
1) Select [Configure HBA Parameters].
2) Select [Topology Selection].
Description
13
or
later)
Werbung
Kapitel
