Werbung
No.
Page
Item
11
4-65
4.4.9
PSA
uninstallation
12
4-90
4.6.4
Windows
firewall setting
13
5-8
Table 5.4
Displayed and
setting items in
the [SNMP
Community]
window
14
D-7
D.4.4
Configuring the
EFI driver
15
D-10
D.4.4.1
Configuring the
EFI
driver
(3.10a6 version)
Addition
- Items automatically set during uninstallation
During PSA uninstallation, the following modifications are automatically put into effect:
- Deletion of the settings from syslog.conf file
- Deletion of the settings from snmpd.conf file
- Deletion of the settings from snmptrapd.conf file
- Enabling of the salinfo_decode automatic startup setting
- Enabling of the smartd automatic startup setting
- Deletion of the settings from services file
- Changing of snmptrapd boot option
Incorrect
- TCP port used for SNMP: 161 port
Correct
-
UDP
port used for SNMP: 161 port
Incorrect
IP Address/MASK
Correct
IP Address/MASK
Incorrect
- Configuring the EFI driver (3.11a4 version/3.11x1 version) (→D.4.4.2)
Correct
- Configuring the EFI driver (3.11a4 version/3.11x1 version
10 Press the [Esc] key once to return to the window displayed in step 6.
11 Specify the boot device.
Incorrect
Select [3. Configure Boot Parameters] from the menu displayed in step 6.
The following menu is displayed:
Description
Sets an access-enabled IP address or network address.
Sets an access-enabled IP address or network address.
The IP address and subnet mask together specify a subnet as
follows:
<subnet-IP-address>/<number-of-subnet-mask-bits>
For example, the subnet with the IP address 10.10.10.0 and
the subnet mask 255.255.255.0 is specified as follows:
10.10.10.0/24
8
or
later) (D.4.4.2)
Werbung
Kapitel
