Werbung
No.
Page
Item
10 Press the [Esc] key once to return to the window displayed in step 6.
11 Set the topology.
Make the following EFI-Bios settings according to the connection type (Fabric
connection or FCAL connection).
*The following screenshot of the EFI-Bios Utility screen corresponds to a configuration
with two Single FC cards and two Dual FC cards.
< Fabric >
Select the card whose setting you want to change.
1) Select [Configure HBA Parameters].
Correct
2) Select [Topology Selection].
Description
9
Werbung
Kapitel
