Werbung
No.
Page
Item
(2GFC)
13 Change the setting for the opposed devices in the connection (Fibre Channel switch/
ETERNUS disk array).
It is necessary to change the settings on the devices at the opposite end of the
connection to match the fixed settings on the Fibre Channel card. (This applies both to
Fibre Channel switches and ETERNUS disk arrays.)
For details, see ETERNUS Disk Storage System Settings / 2.1.1 Setting the To-server
Connection Type (Setting the CA Parameters) of ETERNUS Disk Storage System Server
Connection Guide (Fibre Channel).
14
Set the boot device.
Select ［ 3. Configure Boot Parameters ］ in the menu that is available in step 6 of the
procedure. The following menu will be displayed.
12
Description
Werbung
Kapitel
