Werbung
No.
Page
Item
4
4-3,
4.2
PSA Installation
4-4
(Linux: Red
Hat)
(PRIMEQUEST
580A/540A/580
/540/480/440)
5
4-20
4.2.8
PSA update
installation
6
4-21
4.2.10
PSA
uninstallation
Correct
- During PSA installation, the following modifications required for PSA operation are
automatically put into effect:
- Addition of the settings to syslog.conf
- Addition of the settings to snmpd.conf
- Addition of the settings to snmptrapd.conf file
- Disabling of salinfo or salinfo_decode automatic startup setting (*1)
- Disabling of smartd automatic startup setting
- Addition of the settings to the services file (*2)
- Correction of device types in the scsi.agent file (PSA1.16.2-xRHEL4 or later) (*3)
- Addition of the settings to crontab file (PSA1.3.x-xRHEL4 to PSA1.6.x-xRHEL4)
- Changing of snmptrapd boot option
*1 These automatic startup settings are disabled because of conflicts with some
PSA functions.
*2 Added Port:
Port numbers are not checked for duplication when
the fj-webgate (24450) services file. Change them as necessary.
*3 Corrections are made only for RHEL-AS4 (IPF).
Addition
- Items automatically set during PSA update
During PSA update, the following modifications required for PSA operation are
automatically put into effect:
- Correction of device types in the scsi.agent file (from PSA1.16.1-xRHEL4 or earlier
to PSA1.16.2-xRHEL4 or later)
- Deletion of the settings from crontab file (when PSA between PSA1.3.x-xRHEL4
and PSA1.6.x-xRHEL4 is updated to PSA1.7.x-xRHEL4 or later)
- Changing of snmptrapd boot option (PSA1.19.1-x or later)
Addition
- Items automatically set during uninstallation
During PSA uninstallation, the following modifications are automatically put into effect:
- Deletion of the settings from syslog.conf file
- Deletion of the settings from snmpd.conf file
- Deletion of the settings from snmptrapd.conf file
- Enabling of salinfo or salinfo_decode automatic startup setting
- Enabling of the smartd automatic startup setting
- Deletion of the settings from services file
- Deletion of settings from crontab file (PSA1.3.x-xRHEL4 to PSA1.6.x-xRHEL4)
- Changing of snmptrapd boot option
Description
file
file
5
(*1)
the settings
are added to
Werbung
Kapitel
