Fujitsu PRIMEQUEST 500A Installationshandbuch Seite 474

No. Page Item
3) Select [Point to Point].
<FCAL >
Select the card whose settings you want to change, in the same way as the above 1) and
2) for a Fabric connection.
4) Select [FCAL].
12 Set the link speed.
Make the following EFI-Bios settings according to the Link Speed for the connection
(2, 4, or 8 Gbps).
On the window that is displayed in 3) or 4) of step 11, first press the [Esc] key once to
return to the previous window. In the window displayed in 2), select [4. Force Link
Speed].
The default setting is [Auto negotiate – Default]. Select the Link Speed setting
appropriate to your environment.
10
Description