Werbung
No.
Page
Item
7
4-22,
4.3
PSA Installation
4-23
(Linux: Red
Hat)
(PRIMEQUEST
520A/520/420)
8
4-35
4.3.8
PSA update
installation
Incorrect
- During PSA installation, the following modifications required for PSA operation are
automatically put into effect:
- Adding of settings to syslog.conf
- Adding of settings to snmpd.conf
- snmptrapd.conf file setup
- Disabling of salinfo or salinfo_decode automatic startup setting (*1)
- Disabling of smartd automatic startup setting
- Adding of description to the services file (*2)
*1 These automatic startup settings are disabled because of conflicts with some
PSA functions.
*2 Added Port:
Port numbers are not checked for duplication when contents are added to the
fj-webgate (24450) services file. Change them as necessary.
Correct
- During PSA installation, the following modifications required for PSA operation are
automatically put into effect:
- Addition of the settings to syslog.conf
- Addition of the settings to snmpd.conf
- Addition of the settings to snmptrapd.conf file
- Disabling of salinfo or salinfo_decode automatic startup setting (*1)
- Disabling of smartd automatic startup setting
- Addition of the
- Correction of device types in the scsi.agent file (PSA1.16.2-xRHEL4 or later) (*3)
- Addition of the settings to crontab file (PSA1.3.x-xRHEL4 to PSA1.6.x-xRHEL4)
- Changing of snmptrapd boot option
*1 These automatic startup settings are disabled because of conflicts with some
PSA functions.
*2 Added Port:
Port numbers are not checked for duplication when
the fj-webgate (24450) services file. Change them as necessary.
*3 Corrections are made only for RHEL-AS4 (IPF).
Addition
- Items automatically set during PSA update
During PSA update, the following modifications required for PSA operation are
automatically put into effect:
- Correction of device types in the scsi.agent file (from PSA1.16.1-xRHEL4 or earlier
to PSA1.16.2-xRHEL4 or later)
- Deletion of the settings from crontab file (when PSA between PSA1.3.x-xRHEL4
and PSA1.6.x-xRHEL4 is updated to PSA1.7.x-xRHEL4 or later)
- Changing of snmptrapd boot option (PSA1.19.1-x or later)
Description
file
file
settings
to the services file (*2)
6
(*1)
the settings
are added to
Werbung
Kapitel
