Ryobi RLT4025 Bedienungsanleitung Seite 12

GB
F D E I
The following warning symbols/pictograms are found on the appliance.
SYMBOL EXPLANATION
Warning! Indicates a potentially hazardous situation, which, if not avoided, could result in death
or serious injury.
Read this safety and operating instructions in this booklet and keep it in a safe place for future
reference.
Wear eye protection.
Do not use this tool in the rain. Avoid using it in damp conditions.
Keep all bystanders at least 15m away.
Disconnect the mains plug if the cord is damaged or entangled.
Beware of thrown or flying objects to bystanders. Keep bystanders a safe distance away from the
machine.
Les mots et significations des signalisations suivantes sont prévues pour expliquer les niveaux de risques associés à
ce produit.
SYMBOL SIGNAL
DANGER:
WARNING :
CAUTION :
CAUTION :
SERVICE
Servicing requires extreme care and knowledge
and should be performed only by a qualified service
technician. For service we suggest you return the product
to your nearest AUTHORISED SERVICE CENTRE for
repair. When servicing, use only identical replacement
parts.
WARNING:
To avoid serious personal injury, do not attempt
to use this product until you read thoroughly and
understand completely the operator's manual.
If you do not understand the warnings and
instructions in the operator's manual, do not use
P NL S DK N FIN GR HU
English
SYMBOLS
MEANING
Indicates an imminently hazardous situation, which, if not avoided, will result
in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, could result
in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, may result
in minor or moderate injury.
(Without Safety Alert Symbol) Indicates a situation that may result in
property damage.
CZ RU RO PL SLO HR TR EST LT
this product. Call Ryobi customer service for
assistance.
WARNING:
The operation of any power tool can result in
foreign objects being thrown into your eyes, which
can result in severe eye damage. Before beginning
power tool operation, always wear safety goggles,
safety glasses with side shields, or a full face
shield when needed. We recommend Wide Vision
Safety Mask for use over eyeglasses or standard
safety glasses with side shields. Always use eye
protection which is marked to comply with EN 166.
10
LV SK BG