Machine Elements; For Your Safety; Intended Use; Noise/Vibration Information - Bosch HF 0 602 207 Series Bedienungsanleitung

EURO • Printed in Germany • BA 3 609 929 765 • HF/GGS • GB • OSW 09/00
HF-GGS - Buch Seite 1 Donnerstag, 7. September 2000 9:03 09

Machine Elements

1 On/Off switch
2 Spindle collar
3 Grinder spindle
4 Collet chuck
5 Clamping nut
Not all of the accessories illustrated or described are
included as standard delivery.

Intended Use

The machine is intended for grinding and deburr-
ing of metal with corundum grinding tools.

Noise/Vibration Information

Measured values determined according to
EN 50 144.
The A-weighted sound pressure level of the tool
is typically (A) dB (A).
The noise level when working can exceed
85 dB (A).
Wear ear protection!
The weighted acceleration is typically (B) m/s
Type
2 207
2 208
2 209 101, ...111
2 209 134
2 210 001...004 (200 Hz)
2 210 004 (300 Hz)
2 211
2 211 010 (200 Hz)
2 211 010 (300 Hz)
2 225
2 226
2 227
2 228 201, ...202, ...207, ...211
2 228 204 (300 Hz)
2 228 204 (200 Hz)
2 228 361...377
2 229
2 233
2 236
2 237
2 245
English - 1
2
.
(A) (B)
Never allow children to use the machine.
78 < 2.5
Insert the mains plug only when the machine is
81 < 2.5
switched off.
77 < 2.5
Always direct the cable to the rear away from
77 7.0
the machine.
72 < 2.5
Clamp the workpiece if it does not remain sta-
81 < 2.5
tionary due to its own weight.
76 < 2.5
Do not work with materials containing asbes-
79 < 2.5
tos.
79 3.5
Use only grinding tools with a permissible
< 70 3.0
speed at least as high as the no-load speed of
< 70 4.0
the machine.
70 3.0
Observe the manufacturer's instructions for
71 3.0
mounting and using grinding tools.
71 4.5
Protect the grinding tool from impact, shock
71 < 2.5
and grease.
71 5.0
Keep hands away from rotating grinding tools.
73 3.0
< 70 3.0
Do not clamp the machine in a vice.
< 70 3.0
Apply the machine to the workpiece only when
72 3.0
switched on.
79 < 2.5

For Your Safety

Working safely with this machine
is possible only when the operat-
ing and safety information are
read completely and the instruc-
tions contained therein
strictly followed. In addition, the
general safety instructions in the
enclosed booklet must be fol-
lowed. Before using for the first
time, ask for a practical demon-
stration.
If the mains cable is damaged or cut
through while working, do not touch
the cable but immediately pull the
mains plug. Never use the machine
with a damaged cable.
Wear protective glasses and ear
protection.
When necessary, also wear an
apron.
Wear protective gloves and sturdy
shoes.
When working with the machine, al-
ways hold it firmly with both hands
and provide for a secure stance.
are