Tool Specifications; Machine Elements; Intended Use; For Your Safety - Bosch PVS 280 A Bedienungsanleitung

Tool Specifications

Multi-Purpose Belt Sander
Order number
Rated power
Output power
Belt speed
Belt dimensions
Weight (without accessories) approx.
Protection class

Machine Elements

1 Vacuum hose (19 mm hose system)*
2 Hose connection piece
3 Thumbwheel for speed preselection
4 On/Off switch
5 Sanding belt
6 Knob for belt position adjustment
7 SDS-Quick tensioning lever
8 Ventilation slots
9 Threaded hole for auxiliary handle
10 Auxiliary handle*
11 Adjustable foot plate
12 Idler roller
13 Tensioning roller
14 Screw
15 Lengthways/angle guide*
16 Plastic guide*
17 Pins (4 x)
18 Base unit*
19 Winged screw
20 Screw clamp*
21 Edge guide (3 sides)
* Accessories
* Not all of the accessories illustrated or described are
included as standard delivery.

Intended Use

The machine is intended for dry sanding of wood,
plastic and metal with high removal rates. It is
particularly suitable for the machining of profiles,
corners or hard-to-reach areas.
9 • 2 609 931 414 • 02.01
PVS 280 A
0 603 327 0..
[W] 280
[W] 120
[m/min] 250
[mm] 40 x 303
[kg] 1.6
/ II
general safety notes in the enclosed booklet
must be observed. Before using for the first
time, ask for a practical demonstration.
Wear protective goggles, ear protection and a
dust protection mask.
For long hair, wear hair protection. Work only
with closely fitting clothes.
Wear protective gloves.
If the mains cable is damaged or cut through
while working, do not touch the cable but im-
mediately pull the mains plug. Never use the
machine with a damaged cable.
Connect machines that are used in the open
via a residual current device (RCD) with an ac-
tuating current of 30 mA maximum. Use only
extension cables that are approved for outdoor
use.
Always direct the cable to the rear away from
the machine.
Insert the mains plug only when the machine is
switched off.
Apply the machine to the workpiece only when
switched on. Switch off the machine only after
it has been lifted from the work piece.
Always switch the machine off and wait until it
has come to a standstill before placing it down.
The machine can be used only for dry sanding.
Do not work with materials containing asbes-
tos.
Do not continue to use worn, torn or clogged
sanding belts.
English - 1
PVS 300 AE
0 603 327 7..
300
150
180 – 250
40 x 303
1.6
/ II

For Your Safety

Working safely with this ma-
chine is possible only when the
operating and safety information
are read completely and the in-
structions contained therein are
strictly followed. In addition, the