Tool Specifications; For Your Safety; Machine Elements; Noise/Vibration Information - Bosch GWS 14,4 V Bedienungsanleitung

Tool Specifications

Angle Grinder
Order number
No-load speed
Grinding disk dia., max. [mm]
Tool holder
Weight with battery
approx.
Battery
Order number
Temperature control
Rated voltage
Capacity
Weight approx.
Please observe the order number of your machine.
The trade names of the individual machines may vary.

Machine Elements

1 Battery
2 Battery unlocking button
3 On/Off switch
4 Auxiliary handle
5 Tool holder, SDS
6 Protection guard
7 Clamping lever
8 Roughing/cutting disc*
9 Rubber sanding pad*
10 Sanding disc*
11 Centring collar
12 Cam
13 Locking fixtures
14 SDS release button
* Not all of the accessories illustrated or described are
included as standard delivery.

Noise/Vibration Information

Measured values determined according to
EN 50 144.
Typically the A-weighted sound pressure level of
the product is 81 dB (A).
The noise level when working can exceed
85 dB (A).
Wear hearing protection!
The typical hand/arm vibration is below 2.5 m/s
12 • 1 609 929 C83 • TMS • 26.04.02
GWS 14,4 V
0 601 934 4..
[rpm] 12 500
100
SDS
[kg] 2.1
NiCd
2 607 335 432
NTC
[V] 14.4
[Ah] 2.4
[kg] 0.6
English - 1

For Your Safety

Working safely with this ma-
chine is possible only when the
operating and safety information
are read completely and the in-
structions contained therein are
strictly followed. In addition, the
general safety notes in the en-
closed booklet must be ob-
served. Before using for the first
time, ask for a practical demon-
stration.
Wear protective glasses and hearing protec-
tion.
Wear protective gloves and sturdy shoes.
When necessary, also wear an apron.
Before each use, check the machine and bat-
tery. If damage is detected, do not use the ma-
chine. Have repairs performed only by a qual-
ified technician. Never open the machine your-
self.
The rated voltage of the battery must agree
with the data on the machine.
Before any work on the machine itself (e. g.
maintenance, tool change, etc.) and when
storing the machine, remove the battery.
Before inserting the battery and for tool
changes, always ensure that the On /Off
switch is in the Off position.
Always remove the battery for transportation of
the machine: Danger of injury through uninten-
tional starting when actuating the On /Off
switch!
Convince yourself before using that the battery
is securely seated in the machine.
Do not strain the machine so heavily that it
comes to a standstill.
When working with the machine, always hold it
firmly with both hands and provide for a secure
stance.
Always switch the machine off and wait until it
has come to a standstill before placing it down.
For all work with the machine, the auxiliary
handle 4 must be mounted.
For work with roughing or cutting discs, the
protection guard 6 must be mounted.
Do not work with materials containing asbes-
tos.
2
.